MapTools FAQ: answers and practical guides

Find an answer by topic or search for your task. Each answer links to instructions for the next step.

101 of 101 entries

App menus and instructions

Where do I find instructions for a tool or task?

The manual starts with a collapsed menu tree. Open the relevant branch and select a tool. Below it, guides and practical examples are grouped by topic, including maps, navigation, measurements, 3D and RTK. For your first steps, use QuickStart.

#

Offline maps and map layers

How do I prepare maps for a trip without internet?

Import the required map files while you have connectivity, select them in the map view and check the entire trip area. Prepare elevation and POI data separately if needed. Test your intended functions in airplane mode before leaving; an imported route alone is not an offline map.

#
Does GPS work without a SIM card or mobile internet?

The phone can receive satellite positions without a SIM card or mobile internet when location is enabled. Determining the first position may take longer. Map display and additional functions still need suitable local data; online services and internet-based correction streams require a connection.

#
Why is my offline map blank or missing detail?

Check that the correct local source is selected, that your position lies inside its coverage and that the dataset supports the current zoom level. Confirm that MapTools can still access the file or linked folder. A route, POI file or elevation model does not replace a background map.

#
How can I compare an aerial image with another map?

Configure the relevant sources in the map slots and use an overlay with suitable transparency. Save the combination as a map preset if you use it regularly. Each source needs its own coverage and access rights; online imagery is not automatically available offline.

#
Why is my MBTiles file rejected or invisible?

Check whether it contains raster PNG, JPEG or WebP tiles of 256 or 512 pixels; MVT/PBF vector tiles are not rendered. Empty, damaged or inconsistent datasets can be rejected. If import succeeded, check the map slot, geographic coverage and zoom level. If the file cannot be checked, verify storage access; existing files are preserved.

#

GPX files and geodata exchange

Why does importing a large ASMAPS archive need extra space?

The extracted project can take up more space than the archive. MapTools checks for free space before unpacking and importing. If there is too little space, free up storage and retry. You can cancel until MapTools starts adding the contents to the destination.

#
How do I open a GPX file on Android in MapTools?

Open MapTools' import function, choose the GPX file and review the recognized objects and destination project. Select the imported route, track or waypoint on the map. If you also need a map without internet, prepare the background map separately.

#
Why can I see my GPX track but no map?

GPX stores geographic objects, not background map tiles. Select an online map while connected or import a suitable offline map covering the track. Elevation data and searchable POI data are also separate from the GPX file.

#
How do I display GeoTIFF, MBTiles or GeoPackage data?

Choose the file in the import function and check its detected format and contents. Select imported map data in the appropriate map source; geographic objects belong in a project or object layer. Check coverage, coordinate reference system and available zoom levels if the result is misplaced or empty.

#
How do I exchange field data with desktop GIS software?

Choose an exchange format supported by both applications and suited to your objects, such as GPX for tracks or GeoJSON for geographic features. Check coordinates, attributes and a small sample after transfer. Use a MapTools project backup when you need MapTools-specific project contents rather than just exchange geometry.

#
Can I import heart rate and cadence from my watch?

Yes, from a supported FIT activity or GPX with recognized sensor extensions. The summary shows measurements present in the file. Cadence retains the source convention. Live pulse can also be received locally over Bluetooth LE or ANT+; a watch must support pulse broadcasting.

#
How do I connect a heart-rate sensor?

Open Settings → Device and sensors → Heart rate sensors. Choose Bluetooth LE or ANT+, find the sensor and save it. Saved sensors appear above the search results. Select a saved sensor beside Connect; the last successful connection is listed first. Live pulse appears in telemetry, track status and tour details. To save it with a tour, enable Record heart rate with track. Live-only reception ends when the app goes into the background; track recording is separate. During an active track recording with heart-rate recording enabled, reception continues in the background, with the screen off and after closing the app window. Missing measurements remain gaps. When the same selected sensor is transmitting and within range again, MapTools attempts to resume reception automatically. Android's Force stop ends recording. Bluetooth LE requires a sensor with the standard heart-rate profile; a watch must broadcast its pulse. Allow the requested Bluetooth permissions; older Android versions also require location permission for BLE search. ANT+ requires a compatible receiver, ANT Radio Service and ANT+ Plugins Service; USB also needs ANT USB Service. The Kettler HRM 07930-610 can connect to the Samsung Galaxy Note10+ over ANT+. Heart rate is stored locally without a cloud or manufacturer account. You can explicitly include pulse values from saved tracks in supported exports or backups. Without such a backup, these measurements cannot be restored after uninstalling the app or losing the device. Pulse values are excluded by default. Include them only if you want recipients of this file to see them. GPX, ASMAPS, JSON and ZIP support this option; original activity files and sensor pairing remain excluded. Pulse values from saved tracks are optional and excluded by default. Unassigned pulse recordings, sensor pairing and original import files remain excluded. Normalized project data and other supported sports measurements remain included.

#

Coordinates and GPS accuracy

How do I find, save and share GPS coordinates?

Open the position or coordinate tools, check the displayed format and save the desired location as a marker. Use the coordinate or sharing functions for transfer. Tell the recipient the format and reference system, and check that north/south, east/west and coordinate order remain correct.

#
Why do entered coordinates point to the wrong place?

Check latitude/longitude order, negative signs, decimal separators, degrees versus minutes and the reference system. Grid coordinates also need the correct zone. Compare the point with a known location before using it for navigation or field measurements.

#
Why does my GPS position move while I stand still?

Satellite geometry, obstructions and reflected signals can change a position estimate. Move to a place with a clearer view of the sky and allow time for reception to stabilize. Phone-position averaging may reduce scatter, but repeated points close together do not prove absolute accuracy.

#
When should I average or remeasure a point?

Use phone-position averaging when you can remain still at the intended point. An independent remeasurement at another time can reveal differences between measurement sessions. Review the sample distribution and conditions; do not interpret P68 or P95 as a guarantee of true-position accuracy. USB RTK point measurement uses a separate quality check.

#

Routes, tracks and navigation

How do I follow an imported route?

Import and select the route, then start the appropriate route-navigation function. Check your position, direction and route progress on the map. Prepare local maps before travelling without connectivity and assess terrain and access conditions yourself.

#
Why does GPS track recording stop when the screen is off?

Check whether recording is active and watch for missing-position, permission or storage warnings. Receiving a position does not prove that it was saved. When reopening the app, check the resumed session and its pause state. Recovery cannot reconstruct positions that were never recorded; review gaps and test Android background permissions and battery settings. Reconnect a disconnected USB receiver explicitly.

#
Can I plan a route along paths without internet?

MapTools can use compatible local Mapsforge path data for supported route planning. Make sure the required map is available and covers the route. Results depend on the paths and attributes in that dataset; drawing route points alone does not provide automatic road routing everywhere.

#
Why do distance or elevation gain differ between recordings?

Sampling intervals, GPS scatter, missing sections and different elevation sources can produce different totals. Inspect the track and its elevation profile before comparing statistics. Keep the original recording when editing or exporting a cleaned version. Position jumps that conflict with reliable GNSS speed and its uncertainty are excluded from the derived maximum speed. Strongly fluctuating heights receive a warning; ascent and descent remain estimates. Raw points and geometric distance are retained. A smoother line alone does not prove higher accuracy.

#
Can I use offline maps or orthophotos in a tour image?

PNG backgrounds can use OSM, no map, or supported offline Mapsforge, GeoTIFF, raster MBTiles, raster GeoPackage and GeoTIFF/KML/KMZ image mosaics. Offline sources need complete source credits and your confirmation that their terms permit the image export. Mapsforge uses the built-in export style; its OpenAndroMaps button fills a credits template. Google imagery is not exported. Missing local imagery is not replaced by an online map. Open the route or recorded-track summary and choose PNG export. Select the background, set the crop and rotation, add the required credits and confirm the map terms. Review the preview and values, then save to your chosen location or share the image. Detail depends on source coverage, zoom and resolution; empty areas cannot supply missing imagery.

#
Why is speed missing in my imported route?

Without valid timestamps, measured speed cannot be derived. Heatline never invents times.

#
Why is a Heatline section grey?

Missing values, source coverage or segment gaps cannot provide a valid colour. Inspect point values and source details.

#
Why do colours change between tours?

Tour limits adapt to each object. Use the same fixed or custom limits and metric for comparisons.

#
Does Heatline change my recording?

It changes the display and exports derived values. Original points, times and quality remain available. In Settings, enable “Track contrast border” to show borders around all tracks. The option is off by default.

#
Does target navigation end when I get close?

Target navigation stays active until you stop it manually. A proximity notice does not remove the target. After restarting the app, resume the saved target explicitly. A positive precision status requires RTK Fixed, fresh positions and corrections, and a suitable horizontal estimate over several distinct epochs. It refers to the entered coordinate. Check the target source, reference frame and antenna setup; distance and uncertainty are separate values.

#
How do I open the compass and interpret its direction?

Long-press the compass symbol on the map to open the compass view. Double-tap it to turn the map north up. Device heading and GPS movement course describe different directions. While moving reliably, the map arrow follows the movement course; otherwise it uses a reliable device heading. If neither direction is reliable, the position remains visible without a direction arrow. Choose geographic or magnetic north in the compass view and check the sensor and magnetic-field status. The map uses geographic direction. A reported angular uncertainty is an estimate; missing or unreliable accuracy is not shown as a precise zero-degree error. Metal and magnetic interference can still affect orientation. Long-press the active Fix button on the map to open the confirmation for releasing the fixed bearing. Confirm to release it, or cancel to keep the bearing.

#
Why are track points recorded above the profile accuracy target?

The horizontal accuracy in a recording profile is a quality target. Plausible, current positions may still be recorded above it and marked with greater uncertainty. Invalid data and position jumps are still checked. This does not relax the separate, stricter RTK point-measurement checks or guarantee continuous recording.

#
Can I use fine positioning without RTK?

Yes. Direction, distance and the magnified target view also work with the phone’s built-in positioning. A positive qualified precision evaluation and RTK point measurement still require suitable RTK data. Use the standard mode for walking towards the target when appropriate.

#
Does a 5 cm tolerance give my phone centimetre accuracy?

No. Tolerance is an evaluation limit and the target circle's radius. It does not change actual reception accuracy. Increasing tolerance does not remove the RTK and quality requirements either.

#
Compare speed with pulse or grade

In the track summary, select Speed for the diagram, then choose Heart rate or Grade under Second curve. Thin lines use separate labelled left and right axes. Pulse comparison requires track timestamps and uses the time axis. Missing measurements remain gaps. Comparison curves stay in the app; exports use the main curve. Select a chart point. The outlined buttons below the graph zoom in, zoom out, reset the view or show the selected point on the interactive map with a bright magenta target. Previous point and Next point sit at opposite edges below the slider. Point details show available pulse and imported cadence, power and temperature. Missing pulse remains unavailable. The map preview in the track summary always shows the whole route; use Show on map to explore it. The map button is beside Reset, directly below Zoom out in a fixed two-column layout. On the map, the track panel sits just above the bottom menu and opens upwards. X returns to the track summary. In Settings, enable “Track contrast border” to show borders around all tracks. The option is off by default.

#
How are automatic and manual track pauses recorded?

Track analysis detects periods of standstill automatically; you can adjust the detection settings. GPS recording continues during this detection. You can also pause and resume recording manually. GPS gaps are not automatically treated as pauses.

#
How do I hide the selected track point on the map?

Tap an empty map area or fully close the track information to hide the selected point's crosshair. X or Back from the graph's map view also hides it. Panning, zooming and merely collapsing the information keep it visible. The graph selection is retained; showing the selected point on the map again restores the crosshair.

#

POI, markers and field notes

How do I document a location with photos or an audio note?

Create or select a marker in the intended project and add the available attachment type in its object details. Check the saved position and attachments before leaving. When sharing, choose an export that includes the required media and verify the resulting files.

#
How can I search for POI without internet?

Prepare a suitable local POI source and select it for the search. The map image alone may not contain searchable POI data. Check the search area, categories and source coverage when results are missing.

#
How do I find a saved observation point again?

Open the correct project, select the marker and use target navigation. Check the coordinate format and expected positional uncertainty. Direction and distance help you approach the point, but do not establish its exact physical location or a safe route through obstacles.

#
How do I keep observations from different sites separate?

Use a separate project for each site or task and check the destination when importing or creating objects. Give objects meaningful names and retain relevant notes. Export the intended project and check its contents before sharing or archiving it.

#
How do I save a photo, audio attachment or note as a separate file?

Open the attachment list in an object's details or open its photo viewer, choose to save the original file, and select a destination in Android. The bytes and actual file type are preserved: JPEG stays JPEG and an M4A recording stays M4A. Saving does not convert formats. A text-note marker offers a separate UTF-8 TXT export. Keep location data and photo metadata in mind before passing files on.

#
Which symbols can I use for outdoor and survey points?

The symbol palette includes bicycle parking, rest stop, survey/reference point, GNSS/RTK base station, drinking water, charging station and steep section. Choose the matching symbol when creating or editing a marker. In settings, long-press a symbol favorite and choose its replacement. Only that stored favorite slot is replaced; other entries, including hidden older symbols, are retained.

#

Areas, distances and boundary points

How do I measure an area and its perimeter on the map?

Create a polygon using points along the intended boundary and inspect the resulting outline. Review area and perimeter, then correct misplaced vertices. The result is only as reliable as the input positions and map. If you need higher accuracy, arrange a suitable land survey.

#
How can I estimate the length of a fence or boundary?

Draw the intended line or use an area's perimeter, depending on the task. Check individual segments and the map scale. Plan field checks for bends, terrain and endpoints; a map measurement alone is not a construction-ready site survey.

#
Can MapTools help me find a boundary stone?

Yes. Use the ALKIS Hesse WFS or GPX waypoints prepared in QGIS, check the point identifier, AU/TA type and marker code, then navigate towards the target. WMS imagery supplies background context. Source quality and GNSS accuracy are separate; nearby objects and a distance near zero do not establish a confirmed boundary marker or legal boundary. Use phone GPS for orientation. For RTK, configure the LG290P and SAPOS HEPS before heading into the field. The field report illustrates the approach, RTK fine view and the marking found in the grass.

#
How accurate is an area measured with a phone?

Accuracy depends on vertex positions, satellite reception, map quality and the size and shape of the area. Small coordinate errors can strongly affect small or narrow polygons. Averaging and external receivers can improve the measurement process under suitable conditions, but MapTools does not guarantee survey-grade or legally binding results.

#
Are holes in imported areas preserved?

Yes. Polygon interior rings are retained and considered in display and area calculation. GeoJSON and KML preserve the polygon structure when exporting. GPX represents separate line segments instead, so use a polygon-capable format when the holes matter.

#
How do I export QGIS boundary points to MapTools as GPX?

Select the intended points, create standard text fields name and desc for identification, then choose Export → Save Selected Features As → GPX. Set the output CRS to EPSG:4326, WGS 84. Export point waypoints, reimport the file in QGIS to verify count and positions, and use the GPX import in MapTools. Keep source quality data separately.

#
Does GST 2000 mean my phone can find the boundary stone within 2 cm?

No. GST 2000 describes the recorded point-position standard deviation, not the phone position. Check TA/AU type, the actual source attributes and current GNSS quality separately. A TA record remains TA even if its coordinate status is 1000. Neither an app display nor RTK alone confirms a legal boundary or the identity of a visible marker.

#

Map services and feature layers

How do I add a map service or a feature service?

First identify whether the provider supplies map images or geographic objects. Use a compatible WMS, WMTS or XYZ source for map display, or a supported WFS or OGC API Features source for objects. Check the service address, layer selection, geographic coverage, licence and any registration or fees.

#
Why can I see objects on a map but no attributes when I tap?

A rendered map may show trees, parcels or buildings without providing queryable objects. Select an appropriate feature source and check its coverage, filters and available attributes. MapTools cannot reconstruct feature attributes from the colours of an ordinary map image.

#
Can I take feature-service data into the field offline?

Where supported and permitted by the provider, prepare a bounded local copy and check it before leaving. A saved copy reflects the data available when it was obtained; it is not automatic synchronization. Provider permissions and MapTools' download limits still apply.

#
How do templates and code catalogues simplify field work?

Import a suitable feature-layer template to reuse a source configuration, then check the selected service and filters. Assign matching code catalogues where attributes contain coded values. Verify a few objects against the provider's definitions before relying on the displayed labels.

#
Can I use my own server while MapTools is offline?

Yes, if you enable the optional local HTTPS exception in the connection settings. It applies only to configured map and feature services at private network addresses. The device must still reach the server over the local network. Internet services stay blocked, and radio silence blocks the local exception too.

#
How do I use a server with my own HTTPS certificate?

In the certificate settings, import the public CA or server certificate in PEM or DER format. Verify the host, port, validity and SHA-256 fingerprint before confirming trust. This applies only on the current device to that host and port. It does not bypass hostname checks, enable HTTP or supply missing credentials.

#
How do I save WFS or OGC objects in my project?

In the search results or an object’s InfoTap details, start the project-object import. Select the required objects and the target collection or available new-project option, then load the preview. Check the full geometry and licence, enter a name and save. Points, separate lines and polygons become markers, routes and areas. These are local copies, not automatically synchronised layers.

#
Will another feature import overwrite my edits?

Locally edited objects are not silently overwritten. Review the import choice: keep existing objects, update only locally unchanged copies, or import changed objects as additional copies. Identical objects are skipped; sources without reusable identifiers may produce independent copies.

#
How do I change the colour of a thematic layer?

Edit the individual view under Thematic layers in the map selection. Tap the colour square below its name, choose a palette, RGB or hex colour and confirm. Save the thematic layer too. This changes that view's display, not the provider's data or a WMS/WMTS image; retain clear names to distinguish AU and TA.

#

Elevation, 3D terrain and visibility

Which data do I need for elevation and terrain functions?

Prepare a supported elevation dataset covering the area you want to analyse and enable it in MapTools. A normal map or aerial image is not sufficient. Check data gaps and resolution, and distinguish ground elevation from a surface model that includes obstacles.

#
How do I show maps or aerial imagery in 3D?

Prepare and activate suitable elevation data and supported map or image sources, then open the 3D view. Check that their geographic coverage overlaps. The device needs the documented graphics support; Google Maps imagery is not a source for this 3D view.

#
Why is the 3D terrain flat, incomplete or unavailable?

Check whether usable elevation data is enabled and covers the displayed area. Verify the selected map source and device compatibility in the 3D guide. Missing heights, incomplete coverage or unsuitable data can prevent the expected terrain from appearing.

#
Does the visibility calculation include trees and buildings?

Only obstacles represented in the chosen elevation data can affect the result. A ground-only terrain model normally omits buildings and tree canopies. Treat ViewRange as terrain-based planning support and verify conditions on site.

#
Can I obtain both the photo and terrain from this WMTS?

No. This SWISSIMAGE WMTS supplies map images. Import and enable a numeric elevation model separately. For dependable offline use, prepare and check local imagery as well as local heights.

#

Sun, moon and terrain shadows

How do I check the sun's position for a place and time?

Live → Astronomy. Select the desired location, date and time in the astronomy tools and inspect the sun's direction and elevation. Use this for planning an observation or photo location. Direct sunlight may still be blocked by terrain, buildings, vegetation or clouds.

#
Why can my location be in shade before sunset?

Live → Astronomy → Sun & terrain shadow. A hill or mountain can block direct sunlight while the sun is still above the astronomical horizon. Use suitable elevation data and terrain-shadow tools to inspect this effect. Weather and obstacles missing from the model are not part of that calculation.

#
Can I check daylight and terrain shadows along a route?

Use the route's time-based daylight and shadow analysis with the required elevation data. Review the assumed travel timing. A slower pace or a break changes the arrival time at each route section. Astronomical daylight markers and direct terrain illumination describe different conditions.

#
Do sun and moon calculations work offline?

Astronomical calculations can work locally with the chosen location, date and time. Terrain-based horizon or shadow calculations additionally need suitable local elevation data. Neither calculation provides a weather forecast or guarantees a clear view.

#

USB GNSS, RTK, NTRIP and RINEX

How do I connect an external GNSS receiver by USB?

Open Settings → Device and sensors → Receiver and corrections. Select USB as the position source, choose the compatible receiver and baud rate, connect and confirm Android USB access. You need USB host support, a data cable and sufficient power. Opening these controls does not start a connection. Connection, position fix, corrections and receiver recording have separate status indicators. Stop active corrections before editing their settings. Changing source or disconnecting may require confirmation to end corrections or recording; saved recordings remain available. After unplugging USB, explicitly select the internal source when you want to use the phone location.

#
What do I need to use SAPOS or another NTRIP service?

Settings → Device and sensors → Receiver and corrections. Obtain provider access and enter the host, port, mountpoint and credentials in the NTRIP settings. Check geographic coverage, licence and possible charges; service access is not included in MapTools. Use TLS where supported. VRS streams may additionally require explicit permission to send the current receiver position as GGA.

#
How do I save an RTK point with measurement quality?

With USB selected as the position source, open the point-measurement function when creating a marker. Keep the antenna still and wait for RTK Fixed plus the required quality window of at least five seconds and five epochs. Review and save the measurement record. This is separate from phone-GPS averaging and does not guarantee absolute accuracy.

#
Can I turn every GNSS recording into a RINEX file?

No. The recording must contain suitable receiver observations and, where available, navigation data. NMEA positions and incoming correction-service data are not a substitute for your receiver's raw observations. Open a completed suitable recording and export RINEX locally; review warnings and the receiving service's requirements before submitting it yourself.

#
Which RINEX versions can I choose?

Choose 3.02, 3.04, 3.05 or 2.11 from the dropdown. The default is 3.02, which omits NavIC. Versions 3.04 and 3.05 can include available NavIC observations. Version 2.11 exports GPS and GLONASS only and loses signal distinctions.

#
Which RINEX export includes NMEA?

Observation ZIP: observations only. RINEX package: also navigation data and report. Complete package: also original NMEA, RTCM and USB files. The .rnx and .obs files contain identical observations; only the extension differs. For an observation-only upload, use the single file or observation ZIP accepted by the service. Navigation files are included when available.

#
Which antenna comes with the described LG290P set?

The set described uses Waveshare GPS External Antenna (D), SKU 25346, an active L1/L5 antenna. Do not equate this with reception across all four LG290P bands. The RTC battery is optional; check the selected offer and package contents.

#
How accurate is the LG290P with MapTools?

Our experience with the LG290P is very positive, particularly for its price. Accuracy depends on the antenna, reception, corrections and setup. In the field report, 1.4 cm target distance and 0.9 cm estimated accuracy are separate readings, not an independently verified position error. Test your setup at a known reference point.

#
Do two RTK points a few millimetres apart prove millimetre accuracy?

No. Their separation describes repeatability under that setup. To assess absolute accuracy, compare with an independently known and correctly identified reference point using compatible coordinate references. Save measurement records and antenna details. To check independent setups, reposition the antenna and wait until RTK Fixed is established again.

#
What do the warning triangle and USB Float or Fix mean?

Tap the warning triangle's status field to read the actual cause. USB Float and USB Fix are the receiver's RTK solution states. For a qualified RTK point measurement, wait for fresh Fixed and the required quality window. The GPS profile name is not an accuracy value, and the compass Fix button controls map orientation.

#

Area search grids, alarms and nearby devices

How can I document which parts of an area I have searched?

Create a search grid for the intended area and choose a cell size and search width appropriate to the task and reception conditions. Use the recorded progress as documentation of your movement. A marked cell does not guarantee a complete visual search or detection of every object.

#
Do object alarms work when MapTools is in the background?

Background monitoring uses the supported marker and circle geofences and requires the corresponding Android permissions. Other object monitoring depends on the foreground workflow. Android can delay notifications, so test the intended setup and do not rely on an alarm as an immediate safety warning.

#
Can a live group share positions over long distances?

Live groups use nearby Bluetooth Low Energy communication for supported exchanges. Range depends on devices and surroundings. They do not provide global internet tracking; prepare an appropriate communication method when team members move beyond local radio range.

#
Why does the Remote ID view not show every nearby drone?

The drone must transmit compatible identification data and the phone must support receiving the relevant signals. Range, obstacles, radio settings and permissions can affect detection. An empty list does not prove that no drone is nearby.

#

Backups, sharing and Free / Pro

How do I back up a project together with its photos?

Use the project backup or export option that includes the required attachments, and save the result outside the app's local storage. Check the archive and perform a trial import before deleting originals or changing phones. A GPX export alone does not preserve a complete project with photos. For an ASMAPS project export, select the required objects, including separate photo or audio markers, and explicitly enable object attachments. Check the included and excluded attachment counts and sizes before saving. Exporting only a route does not automatically include a separate photo marker. A missing selected original causes an export error.

#
Are GNSS recordings included in project backups?

No. GNSS recordings are stored separately and must be exported separately. Keep the original recording package as well as the RINEX export when you need both diagnostic data and observation files. Receiver profiles also remain local to the device.

#
What should I check before sharing field data?

Review coordinates, object details, attachments and the chosen export contents. These may reveal precise locations and other information about the recorded site. Share only the files needed for the task with the intended recipient, and respect the source data's licence.

#
Does Pro include map-provider subscriptions or correction services?

External service subscriptions are not included. MapTools Free and Pro define the app's functions and limits. External maps, geodata and correction services have their own access conditions, licences and possible fees. Check the current Free / Pro comparison and the relevant provider before preparing your workflow.

#
Will a backup or QR code enable my certificate trust on another device?

No. Additional certificate trust and the permission for local HTTPS access are device-specific. Configure them deliberately on the other device and verify the certificate again. Restoring a source configuration is not approval to trust its server.

#
How do I save the diagnostic log directly?

Open the local diagnostic log under Background activities and storage. Refresh and review it as needed, then save the displayed snapshot as UTF-8 TXT to a location you choose. Sharing remains a separate action; saving sends nothing automatically. The function is available in Free and Pro.

#
What does Pro cost, and is it a subscription?

Pro in Germany: €4.99 once. No subscription. Use MapTools for free and unlock Pro in the app through Google Play. The introductory price applies to Germany. Prices and currencies may vary by country; Google Play shows the price before purchase.

#
Does a later price increase affect my Pro purchase?

Your purchased Pro unlock remains valid without an additional payment. Later prices apply only to new purchases.

#
How do I unlock Pro?

Download MapTools for free from Google Play. Then unlock Pro in the app. Google Play shows the price before you confirm the purchase.

#
Does a backup of my map presets include all offline maps?

Not automatically. Select the required offline maps, layers, terrain and map styles in the app backup as well. Review the contents and size before saving, and check the restored resources offline on the destination device.

#
Which restore mode should I choose?

Review the archive, warnings and destination first. You can import as a new project, select content categories or replace the current project. The new-project choice does not automatically isolate settings and shared resources. Back up the destination before replacing content, resolve conflicts and check the final review before confirming.

#

Languages of map and POI names

How do I use English names and keep the source name as a fallback?

Open “Map and POI names” in general settings or in the map browser. Choose “Source name”, “Follow app language” or “Preferred language”. With the last option, search for a language by its name or code and apply your choice. For English names, choose English as the preferred language. If an object has no suitable English name, MapTools shows its source name. Your own custom names are preserved.

#
Can different maps and POI sources use different languages?

Open “Language for a data source” in the map browser or use the source setting in the object details. Select the map, POI source or feature layer and set its language. “Use general setting” restores the general preference for that source.

#
Can I display two names together?

Enable “Also show the source name” to show a distinct source name alongside the selected name where the map supports it. Duplicate names are not repeated. Street and path labels remain in a single language; labels embedded in map images cannot be changed this way.

#
Does the object information show every language?

Open an object and expand “Names and languages”. It lists name variants received in the loaded data, with a language or a note that no language was specified. Official, short, alternative, historical and international names remain distinguishable. The source may contain additional names that were not returned.

#
Do I have to select a language when importing a map?

Import preserves available name variants; no language choice is required during import. Mapsforge map and POI files can supply multilingual names. A file language list is only a hint: availability differs by object. Already stored variants can be selected without importing again. GeoJSON can provide language fields such as name:en; GML can identify names with xml:lang. For provider-specific fields in feature data, including GeoPackage tables and Shapefile attributes, use “Name fields”. Enter one documented assignment per line, for example NAME_EN=en or NAME_LOCAL=source. Only fields actually supplied can be used; missing variants cannot be reconstructed.

#
Why do some map labels ignore my preferred language?

Names embedded in raster images are part of the picture. Changing the preference cannot translate them. This applies to fixed raster tiles and raster GeoPackage maps. Google controls the language of its base map; MapTools can still apply your preference to its own POI labels and object details.

#
Does every online map service support a language setting?

WMS, WMTS, OGC map services and tile providers do not share a universal map-language switch. Enable “Use a documented service language option” in the online source settings only when the provider documents that option for the map and its object queries. A metadata language alone does not establish support for translated map labels. Provider registration, charges and licence conditions still apply. Selecting a language does not include paid data or grant access to restricted services.

#
Does the name language setting work offline?

Stored name variants remain usable without internet. Prepared raster maps retain the labels in their saved images. To obtain different image labels, choose a supported provider language and prepare the area again where the provider allows it. Check the saved area before travelling; a language preference does not download missing data.

#

Check measurement accuracy

How can I check measurement accuracy at a known point?

How far is your measured position from a known point? You can check this yourself with MapTools: enter the official coordinate of a reference point, find its physical mark and measure exactly there. Then compare the reference position with your measurement. Keep the reference coordinate unchanged throughout the test. Give your own measured marker a different name. This preserves the evidence of any offset from the known point.

#
What difference RTK can make

Basic GNSS tests may show metre-scale offsets. SAPOS Hessen describes 1–2 cm horizontal accuracy for its HEPS service with suitable RTK use. Whether your setup achieves this depends on reception, multipath, corrections, antenna and centring, among other factors. Source: SAPOS HEPS. For example, our images show a 4.9 m horizontal estimate with RTK Float and later 1.5 cm with RTK Fixed. These are estimates at different moments, not a controlled demonstration of an equivalent improvement in absolute error. Your test depends on the actual observed offset from the reference point.

#
Can I compare the measured height directly?

A receiver's MSL height is not automatically an official DHHN2016 normal height above NHN. Check the receiver's model and vertical reference. Merely changing the coordinate display format does not perform a verified height transformation. Enter an antenna height in the RTK measurement only when the vertical height to the antenna reference point, ARP, is known. If the receiver already accounts for this height, select the corresponding option and avoid applying it twice. Even an antenna resting directly on a bolt does not necessarily have its ARP at the bottom of the housing. MapTools does not perform tilt compensation or vertical-reference transformation here.

#