Bearing and coordinates

Bearings and coordinates with your cell phone

With ArxSilex MapTools you create a cell phone bearing from a known point, take coordinates from different formats and calculate intersections from bearings or circles. In this way, target areas can be clearly defined on the Android map and saved as markers.

Overview

Enter coordinates, take aim and calculate intersections

MapTools combines coordinate input, map objects, GPS, compass and geometric calculations. If you want to locate coordinates or document a direction from the terrain, you can combine known points and measured angles in a common map project.

Choose your starting point flexibly

Set the starting point directly on the map, enter a coordinate, adopt an existing object or use your current GPS position.

Capture direction

Enter the angle in degrees, capture the current device direction with Set or visually align the bearing with LiveView to a target.

Save intersection

Combine two bearings for a cross bearing or intersect a bearing with a circle. Intersection points found can be used as markers.

Reuse the result

Check the point on the map, name it and then use it for destination navigation, export, sharing or other calculations.

Workflow

Create a bearing on your smartphone

A bearing describes a direction from a specified starting point. It is not an automatically calculated route.

  1. Open bearing toolOpen the tools menu, select Bearing and check the desired length of the shown direction line.
  2. Set starting pointUse map, coordinate input, an existing object or Here (GPS).
  3. Determine directionEnter an angle or use device orientation or LiveView. 0° corresponds to north, 90° east, 180° south and 270° west.
  4. Check bearingCheck the starting point, angle and line length on the map and save the object in the project.
  5. Calculate intersection pointChoose two suitable bearings or a bearing and a circle and use a plausible result as a marker.

coordinates

Use known coordinates as a starting point

MapTools recognizes or processes common geographical notations and selected projected coordinate systems. A coordinate can be further used as a marker, bearing start, navigation destination or export object.

Geographic formats

  • DD – decimal degrees
  • DMS – degrees, minutes, seconds
  • DDM – degrees and decimal minutes
  • Plus Code and Maidenhead locator

Grids and projections

  • UTM and polar UPS
  • MGRS based on UTM/UPS
  • Web Mercator
  • Selected CRS via unique EPSG specification

Check before taking over

  • Axis order and hemisphere
  • Zone, unit and reference system
  • Map location and source of values
  • Do not confuse digit count with precision

Cross bearing

Carry out cross bearings with your cell phone

For a cross bearing, you create two bearings from different locations toward the same target. MapTools calculates the intersection of the direction lines and displays its coordinates.

Two locations

The further apart the observation locations are, the clearer the geometry can be compared. Both bearings must point to the same target area.

Favourable intersection angle

Very shallow angles magnify small directional errors. Clearly crossing lines, ideally between approximately 60° and 120°, usually provide a more stable result.

Plausibility instead of apparent accuracy

Check the intersection on the map and terrain. GPS scattering, compass calibration, magnetic interference, device attitude and target acquisition affect the result.

Insight into the app

From the coordinate to the calculated target point

The examples show a construction of starting point, distance and direction as well as the calculation of an intersection point from two bearings.

MapTools shows a starting point, radius and bearing on the Android map
Construct direction and distanceA known point, a radius and a bearing geometrically limit possible target points.
MapTools calculates the intersection of two selected bearings and offers it as a marker
Evaluate cross bearingTwo bearing objects are selected; the result appears with coordinates and can be saved as a marker.

Areas of application

Where bearings and coordinates interact

The tools support different tasks as long as the limitations of the sensors and output data used are taken into account.

Geocaching and coordinate puzzles

Construct the distance and direction from a known point, check possible intersections and then head directly to the target marker.

Geocaching with MapTools

Forestry, hunting and district work

Document observation directions, combine known points and record a plausible target area on the map.

Forestry and hunting

GIS and field work

Adopt coordinates from different sources, place them in a clear spatial reference and exchange them as a project object.

Mobile GIS work

FAQ

Frequently asked questions about smartphone bearings

Can I take bearings with MapTools?

Yes. An entered coordinate can be used as the starting point of a bearing. From there you set a direction manually, via the current device orientation or via LiveView.

How does a cross bearing with a cell phone work?

Take a bearing from two different starting points towards the same target. Then select both bearings in the intersection calculation and check the calculated point on the map.

Can I determine a target point based on direction and distance?

You can create a bearing at the starting point for direction and a circle for distance. The intersection of both objects provides one or more possible target points.

How accurate is a smartphone bearing?

The result depends on GPS reception, compass calibration, magnetic interference, device posture, location accuracy and intersection angle, among other things. MapTools provides a comprehensible guideline, not a surveying guarantee.

Do bearings and coordinates work offline?

Maps, coordinates, project objects and geometric calculations that are already available locally can be used without mobile communications. Online maps and external services that are not loaded still require a connection.

ArxSilex MapTools

Try bearings and coordinates on Android

Install MapTools over Google Play or open the detailed instructions on bearing, cross bearing and coordinates.