Manual

Bearing

Bearings draw a directional line from a starting point. They help to document observation directions, limit target areas or calculate intersections with circles and other bearings.

Overview

What a bearing stores

A bearing consists of a starting point, direction, line length, color and visibility. The direction is stored as an angle clockwise from north.

Starting point

The starting point can come from the map, from coordinates, from existing objects or from the current GPS position.

Direction

The direction can be entered manually as a number, set from the current viewing direction or taken from the camera view using LiveView.

Line length

The length limits the drawn line on the map. This means the map remains readable, even if the bearing only serves as a directional aid.

Steps

Establish bearing

The normal process is: start the tool, check the length, select the starting point and set the direction.

  1. Step 1Open the Tools menu at the bottom and select Bearing.
  2. Step 2Check or adjust the length of the bearing line in the lower tool bar.
  3. Step 3Select starting point: Tap map, open coordinates, select object or use here (GPS).
  4. Step 4Set the direction: Enter the number of degrees, use Set for the current direction or use LiveView.
  5. Step 5Review, rename, edit, share, export, or delete the saved bearing in the Object Browser.

Select point

Starting point options

Depending on the situation, another source may be faster or more accurate.

OptionDescription
Tap mapTap directly on the map during bearing mode. This point is adopted as the starting point; then enter the angle in degrees.
🌐 CoordinatesOpens the coordinate input. This allows you to adopt a starting point from radio, paper map, web map or another system.
📋 ObjectsOpens the object browser. An existing marker, POI or other suitable object can serve as a starting point.
⌖ Here (GPS)Uses your current GPS position as a starting point. This option is only useful if location and GPS fix are available.

Direction

Angle and Line options

The bearing can be created consciously manually, from the current orientation or visually via the camera.

OptionDescription
Length of the bearing lineIn the lower tool bar you can set how far the line is drawn. The app saves the length in km or mi; Values from 0.1 are valid.
SetInstantly generates a bearing from your current GPS position in the direction the device is currently pointing. Location and current device/compass angle are used for this.
LiveViewOpens the camera view. You fix a point visually, the app takes the starting point and bearing direction from it and saves the bearing from it.
Angle manuallyFor Map, Coordinates, Objects or Here (GPS) you first select the starting point and then enter the bearing direction as a number of degrees. 0° is north, 90° east, 180° south, 270° west.

Intersection points

Combine bearing with circle or second bearing

You can calculate intersection points in the object browser. To do this, select two suitable objects, for example a bearing and a circle.

Bearing + bearing

Intersects two directional lines. This is helpful for cross bearings or when two observation directions are brought together.

Bearing + radius

Calculates where the bearing touches or intersects a circle. Depending on the relative position, there are 0, 1 or 2 intersection points.

Result as a marker

Intersection points found can be saved as markers. After that, they are normal map objects and can be edited, exported or shared.

Related

Matching pages

Circles, compass and tools menu are closely related to bearings.

Tools menu Circle Compass Quick start

Heatline: Color routes, tracks and bearings

A bearing remains a direct connection. Planned routes follow your choice between direct connections and paths. Heatline colours the existing geometry. The starting elevation of a bearing does not supply elevations along the whole line; local terrain data you explicitly select can provide them within its coverage.

Heatline: Color routes, tracks and bearings